A cutlist is for more than cutting wood!
A Cutlist is more than a list of parts – or should be.
Most of the people considering using SketchList 3D want a cutlist report for their work. In Sketchlist 3D, a cutlist provides a series of functions that help you go to the shop and turn the cut list into parts. This post will show you several ways to use a cut list report most effectively.
The first version of a cut list is found under the reports menu item in Sketchlist 3D.
his is the simplest version of the cutlist.
The cut list contains the:
- · assembly name
- · part name,
- · cut thickness,
- · cut with,
- · cut length,
- · material,
- · material name,
- · and notes.
As you can see from this sample report, all the information you need to cut and produce your project is available in SketchList 3D. Any changes to your design, additions, deletions, or resizes, are automatically updated in this report.
But how to make it more useful? Use the Parts List report.
To get to the report click Reports – Parts List Report.
This opens a very powerful form that allows you to specify exactly which information appears on the report, sort that in three levels, and filter information by value.
For example, select part name, material type, and dimensions. Then sort by material type and part name, then display only parts with a thickness = 1.
But there is more. You can add the location information for each part – left, bottom, and front – and sort on it.
With that sort order you get information about the assembly. You see which boards are at the front, bottom, left of the assembly. [Note that the values are relative to the board’s container. So a left of zero for a door stile means zero in the door container.]
To check on it, I threw in the grain direction and board orientation. If for example your side board had its thickness going from bottom to top – well that is the wrong orientation for a side board.
This listing provides a good quick check on the project. Throw in a shop drawing and you are even better prepared to start cutting.
Even if you use SketchList 3D Pro and generate optimized cutting layout diagrams, this approach to cut list reports will help you check, organize, and assemble you project.
To read something a bit more general about cutlists, see this post.
David Rozewski
My woodworking love started in 6th grade in school shop class. I have a BS in Industrial Technology and an MBA. At my first job, I computerized a production accounting system – the results were positive, and I loved the challenges. I left the corporate world to begin woodworking full time and one of my first decisions was to use CAD for my designs. I found that CAD did not meet all my needs. I wrote a specification of what I wanted and turned it into a prototype. SketchList 3D incorporated in 2007. We completed programming and launched. Today thousands of woodworkers use SketchList 3D.
